EN RU ZH

Insole Transfer Machine LS-801JM

Specifications:

  • Power: 1,5 kW;
  • Voltage: 220 V / 50 Hz;
  • Productivity: 2900 pairs / 8 h, including the replacement of the tape;
  • The width of the adhesive tape: min 69 mm, max 340 mm;
  • Recommended adhesive tape: 160 mm (for female insoles), 200 mm (for male);
  • The size of the lower and upper shaft: 38 cm;
  • Size without packaging (LxWxH): 1120x840x1250 mm.
  • Size in the package (LxWxH): 690x1080x1390 mm;
  • Net weight: 134 kg;
  • Gross weight: 165 kg;
  • Сode: TW-LS-NS/801JM
Get price
  • Description
  • Video
  • Features
  • Warranty
  • Delivery

Insole Transfer Machine LS-801JM is used at the finishing stage of shoe production. It provides equal application of the adhesive base over the entire area of the insole.

This machines uses a special adhesive tape, which is activated by the built-in heating surface. The machine is equipped with clamping and tape drive shafts with a chain drive. For female insoles, it is recommended to use adhesive tape with a width of 160 mm, for male - 200 mm.

In the traditional gluing process, unrefined rubber is used as the adhesive composition, which releases the by-products of dissolved glue (toluene). This machine allows you to avoid harmful fumes and it is harmless for your health. The operation of the machine is based on the absorption of the glue in the insole due to the action of temperature.

The advantages of the insole transfer machine LS-801JM :

  • eco-friendliness;
  • convenience in operation;
  • minimal glue consumption;
  • minimal care of the machine (does not require cleaning from the glue leftovers);
  • accelerated gluing process compared to the manual method of applying glue;
  • high performance (2900 pairs in 8 hours, including the replacement of the tape).

The film glue is put on a stand, which is adjustable up to 38 cm. This allows to use the film glue with a width of less than 38 cm. Thanks to the convenient design of the fasteners, bushings of any diameter are suitable. The clamping flanges are connected to a shaft with a diameter of 34 mm. The diameter range of the spool is 69-78 mm.

You can buy the Insole Transfer Machine LS-801JM with an official guarantee from the NGS manufacturer by prior order on the website or by phone. The calculation of the price is individual. The company's specialists will provide you with the initial setup and training in the operation of the equipment.

  • Power: 1,5 kW;
  • Voltage: 220 V / 50 Hz;
  • Productivity: 2900 pairs / 8 h, including the replacement of the tape;
  • The width of the adhesive tape: min 69 mm, max 340 mm;
  • Recommended adhesive tape: 160 mm (for female insoles), 200 mm (for male);
  • The size of the lower and upper shaft: 38 cm;
  • Size without packaging (LxWxH): 1120x840x1250 mm.
  • Size in the package (LxWxH): 690x1080x1390 mm;
  • Net weight: 134 kg;
  • Gross weight: 165 kg;
  • Сode: TW-LS-NS/801JM

Warranty conditions for the Insole Transfer Machine LS-801JM are indicated in the Warranty card that you receive when you purchase.

Insole Transfer Machine LS-801JM You can buy with a guarantee in NGS by making a request on the website or a specialist by phone or email. Detailed information on connecting, setting up, installing Insole Transfer Machine LS-801JM in the NGS Equipment Operating Instructions.

You can buy the Insole Transfer Machine LS-801JM with delivery on the website or from an NGS specialist.

We offer:

  • Shipment at own expense from a warehouse (Odessa, Kharkov, Dnipro, Lviv, Brovary) of the available equipment;
  • Delivery all over Ukraine by a transport company (optional) to any city;
  • Delivery to the CIS and European countries is carried out by the transport company selected by the Customer.

You can order the Insole Transfer Machine LS-801JM from NGS with delivery to any country. The cost and delivery time Insole Transfer Machine LS-801JM depends on the weight, quantity of equipment and order urgency.