Backpart Moulding Machine (one hot, one cold with plates) D860D

Heel moulding machine with smoothing plates for two punches (hot and cold). This equipment is used in a shoe production at the assembly department for moulding to shape the heel part of the shoe workpiece.

The moulding process of the shoe back part is conducted with a heated air cushion punch and a cooled silicone cushion punch. The workpiece is installed on a hot punch, and under the influence of high temperature, heel volume is formed, glue is activated and the back is fixed, the workpiece and the backing are applied.

The final fixation and moulding is carried out on a cold punch, where the smoothing plates smooth the long edge. This process facilitates the production of shoes, excluding defects and reduces the time spent on the production of finished products.

The advantages of the heel moulding machine XD860D :

- two working punches (hot and cold);

- the usage of direct cooling, without the use of antifreeze and pump;

- setting up the temperature and holding time of the shoe workpiece;

- work launch - with two hands at the same time, eliminates injuries during work;

- convenient management of the equipment;

- simple settings.

Productivity of the equipment is from 100 to 125 pairs per hour, and depends on the type of shoes and features of the production process. With the purchase of the NGS moulding machine, we provide assistance in connecting, setting up and answering any working questions online 24/7.

All equipment presented on the website is available in our warehouse or in branded show-rooms where our clients can get acquainted with the machines. You can find the location of the nearest show-room on the map on the Contact page or you can contact NGS dealer.