Pneumatic sole attaching press DC3

DC3 Pneumatic Sole Glue Press is an Iron Fox type. The device allows to glue soles of any style and type. Used in the assembly department of the shoe lasting phase.

The semi-pair top blank is fixed on a sliding frame, which is located in the press working chamber. After this operation, the "bell" of the working chamber is lowered. Pressing along the entire track of the shoe is carried out by the first membrane, the second membrane squeezes along the the sole. The productivity of the machineis 1000 pairs in 8 hours.

Key features of the Pneumatic sole attaching press DC3 :

• the built-in solar cell for automatic start-up and safety;
• the ability to adjust the time and pressure;
• selection of manual or automatic mode. In manual mode, the operation process is started by pressing the buttons by the operator. In automatic mode, the operation process will start immediately after the operator has installed a half-pair and removed his hands from the working area;
• regulation of the nozzle position is carried out: electrical (up / down) and mechanical (forward / backward);
• to prevent “idle” start of the press and rupture of membranes, a microswitch (limit switch) is installed in the fitting, which determines the presence of a workpiece on it;
• to ensure the safety of the operator, the machine is only operated with two hands.

You can buy Pneumatic sole attaching press DC3 by prior order in the online store or in the showrooms of the NGS supplier. It is possible to contact our managers if needed (information for communication is indicated in Contacts).

The cost of the machine is calculated on an individual basis. The supplier's catalog contains an assortment of sole attaching presses. When purchasing NGS equipment, a guarantee for service and personnel training is included.