Pneumatic press for gluing the sole I14 (automatic)

Pneumatic sole gluing press I14 (automatic) is used in the assembly area of ​​the shoe tightening stage. This machine  is used for more durable gluing of the sole to the shoe workpieces of different styles.

The setting of the pneumatic sole gluing machine is regulated with the help of the pressure  valve and the pressure time with a relay. Then you need to place the shoes with the sole upward in the compartment. Once the compartment is locked, it fills with compressed air, providing full-area pressure for a firm gluing sole to the workpiece. After the operation is complete, compressed air is automatically released.

The automatic sole gluing machine contains:

• two buttons to start;
• exposure timer;
• power switch;
• power indicator;
• air supply control button;
• pressure regulator;
• pressure gauge for pressure indication;
• emergency shutdown button.

To start the sole glue press, follow these steps:

1) turn on the power swith;

2) open the air supply;

3) raising the "bell" is automatically;

4) install the workpiece on the shoe last;

5) adjust the needed height of the shoe workpiece using the handwheel;

6) after installing the half-pair, you need to press the buttons to start the gluing cycle. The machine is started only with two hands to ensure the safety of the operator;

7) lowering the "bell" is carried out automatically.

You can order the pneumatic press for gluing the sole I14 (automatic) on the website, by phone or in the supplier's showrooms. The price of NGS equipment is calculated individually. This machine comes with a warranty period, free machine service, expert consulting and staff training.